Aerospace & Defense
Flight-critical controllers, ground-system power boards, and avionics sub-assemblies. AS9100D since 2017, with documented counterfeit-avoidance on every line item.
Industries Served
Six regulated verticals. One Class 3 certified manufacturer.
Noora Electronics already speaks the compliance language of the industries you build for — industrial automation, robotics, aerospace & defense, medical devices, university R&D, and EMS partner overflow. Every program ships under one quality system, one NPI lab, and one set of certifications your auditors recognize on the first pass.
- 87engineers, technicians & QA specialists on staff
- 6regulated verticals served from one Austin facility
- 9NVIDIA Jetson-based edge-AI programs launched in 2024–2025
Vertical Index
Six industries, one certified manufacturer.
Each vertical below is staffed by a Noora principal engineer with at least a decade in that segment. Pick the closest match — we’ll scope a quote against the certifications, volumes, and lifecycle requirements your auditors actually ask for.
-
01
Industrial Automation
PLCs, sensor modules, and edge I/O for plant-floor OEMs. Thermal-managed layouts cut client power loss by up to 34%.
Industrial Automation detail → -
02
Robotics & Edge AI
NVIDIA Jetson-based compute boards for autonomous mobile robots and machine vision. Named on nine 2024–2025 launches.
Robotics & Edge AI detail → -
03
Aerospace & Defense
AS9100D flight-critical and ground-system electronics with full part traceability and zero counterfeit exposure.
Aerospace & Defense detail → -
04
Medical Devices
ISO 13485 manufacturing for Class II / Class III device OEMs — from patient monitors to benchtop diagnostics.
Medical Devices detail → -
05
R&D Labs
University and corporate research teams running low-volume prototyping with named-engineer DFM feedback on every job.
R&D Labs detail → -
06
EMS Partners
Tier-1 overflow capacity for distributors and EMS houses that need AS9100D / ISO 13485 sub-manufacturing on demand.
EMS Partners detail →
01 · Industrial Automation
Cut power loss and time-to-prototype on every plant-floor board.
Automation integrators come to Noora for our proprietary thermal-management layout library — referenced designs that drop MOSFET and regulator losses by up to 34% versus off-the-shelf templates. Pair that with 72-hour rapid-turn prototyping on boards up to 12 layers, and a named principal engineer reviews every DFM before a panel is queued.
- Thermal-vias, copper-pour, and heatsink land-pattern library, versioned per your enclosure.
- 72-hour rapid-turn NPI on boards up to 12 layers, with same-day engineering feedback.
- Sensor signal-chain reference designs for 4–20 mA, RTD, and isolated digital I/O.
- UL 508A and CE pre-compliance checklists reviewed in EMC pre-compliance chamber.
02 · Robotics & Edge AI
Proven on nine Jetson-based programs in 2024–2025.
Robotics OEMs can’t afford a recall — not on an AMR shipping into a customer’s warehouse, not on a vision-guided pick cell running three shifts. Noora was named partner on nine NVIDIA Jetson-based edge-AI programs launched in 2024–2025, each built under IPC-A-610 Class 3 with a documented thermal plan and full BOM traceability.
- Jetson Orin / Xavier / Nano SoM carrier designs with validated thermal envelopes.
- High-density BGA layout (0.4 mm pitch) with in-house 4-axis BGA rework capability.
- Edge I/O expansion: GMSL camera, CAN-FD, RS-485, isolated PoE+.
- CE / FCC pre-compliance sweep in in-house EMC chamber before external lab.
03 + 04 · Aerospace, Defense & Medical Devices
Two regulated buyers. One quality system under one roof.
AS9100D for aerospace & defense and ISO 13485 for medical devices run on the same Austin floor, under the same IPC-A-610 Class 3 discipline, with the same in-house NPI lab. For procurement leads juggling both programs, that means one quality audit, one part-traceability chain, and zero handoff risk between certified workcells.
- AS9100D manufacturing with 41 franchised distributor relationships — no brokered parts.
- ISO 13485 workcell for Class II / Class III device OEMs, including patient-adjacent electronics.
- Lot-traceability files, traveler packets, and first-article inspection reports included every shipment.
- Zero major non-conformances in the last 28 months of Class 3 production.
Medical Devices
Patient monitors, benchtop diagnostics, and surgical-assist electronics. ISO 13485 workcell with design-history-file support across NPI and lifecycle runs.
05 + 06 · R&D Labs & EMS Partners
Low-volume NPI for research. Tier-1 overflow for partners.
University research teams and corporate R&D labs get the same Noora principal engineer on every job — not a quoting desk — with lifetime DFM reviews led by engineers averaging 14 years on the floor. EMS partners and franchised distributors get a tier-1 sub-manufacturer that can absorb overflow without breaking certifications, lead-times, or part traceability.
R&D Labs
Low-volume prototyping from 1 to 500 units, with 72-hour rapid-turn on boards up to 12 layers. DFM feedback, stack-up review, and assembly DFA from a named engineer on every quote.
EMS Partners
Tier-1 overflow capacity for distributors and competing EMS houses needing AS9100D or ISO 13485 throughput. Same NPI lab, same traceability, same 99.2% on-time delivery record.
- Lifetime DFM — engineer of record stays assigned through every revision of the build.
- Franchised-distributor sourcing only — no brokered parts, even on 5-piece prototype runs.
- Flexible MOQ from prototype to 50,000-unit production runs on the same SMT lines.
Next Step
Tell us your vertical. We’ll scope to your certifications.
Send your BOM, gerbers, and target volume. A Noora principal engineer from your segment responds within one business day with a fixed-scope quote and the certification evidence your auditors will ask to see.
Request a Quote
Quality System Overview
Or call the Austin NPI desk — +1 (512) 555-0417 · [email protected]